Tinting Glazes


Revision as of 03:57, 27 June 2011 by Andre (Talk | contribs)
(diff) ← Older revision | Current revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Mix with Slow-Drying Fluid Acrylics at any desired ratio or with Pigment Dispersions up to a 5:1 ratio of Glaze to Dispersion. Do not mix with oil paint. Glossy, non-absorbent surfaces should be abraded for increased adhesion. Full cure requires 24-48 hours. Seal with a varnish/topcoat for maximum durability. Clean tools with soap and water.

Personal tools