Tinting Extra Rough Sand Texture

From PROCEED SYSTEM Wiki

(Difference between revisions)
Jump to: navigation, search
(Created page with '300px *May be tinted with Proceed Pigment [http://proceedsystem.com/wiki/index.php/Category:Dispersions Dispersions] (transparent pigments are recommende…')
Line 1: Line 1:
-
[[File:Xrgb.JPG|right|300px]]
+
[[File:D162-D Extra Rough Sand Texture.jpg|right|300px]]
-
*May be tinted with Proceed Pigment [http://proceedsystem.com/wiki/index.php/Category:Dispersions Dispersions] (transparent pigments are recommended), or Proceed [http://proceedsystem.com/wiki/index.php/Category:Slow_Drying_Fluid_Acrylics Slow Drying Fluid Acrylics] and Proceed [http://www.proceedsystem.com/wiki/index.php/Category:Metallic_Mediums Metallic Mediums].  Additions of more than 10% of Fluid Acrylics or Metallic Mediums will lower application viscosity.   
+
*May be tinted with Proceed Pigment [http://proceedsystem.com/wiki/index.php/Category:Dispersions Dispersions] (transparent pigments are recommended), or Proceed [http://proceedsystem.com/wiki/index.php/Category:Slow_Drying_Fluid_Acrylics Slow Drying Fluid Acrylics] and Proceed [http://www.proceedsystem.com/wiki/index.php/Category:Metallic_Mediums Metallic Mediums].  Do not add more than 10% Proceed Pigment Dispersion, universal colorant, Proceed Metallic Medium or Slow-Drying Fluids in combination by volume.   
 +
 
 +
*Use of more than recommended percentage could cause a change in application characteristics or, in the case of dispersions, water sensitivity and durability of the dried finish.
 +
Always mix colorants thoroughly and test tint formulas for desired color before use.
-
*Can be tinted with water based products.  Tinting with opaque colors, especially house paints, or at a high ratio will reduce some of the reflectance.
+
*Can be tinted with water based products.  Sand Textures are also compatible with most universal colorants.
*See [[How to Tint the Proceed Products]] for more information.
*See [[How to Tint the Proceed Products]] for more information.
-
 
-
== Color advice: ==
 
-
 
-
 
-
*Apply straight out of the bucket over cooler tones.  The Glass Beads themselves have the most "neutral" color Golden could find but due to the nature of light reflectance, the beads have a blue or cool cast.
 
-
 
-
*When Extra Rough Glass Bead Texture is applied over red or warmer tones, the result is a frosty appearance on the off angle.
 
-
 
-
*We advise to tint the Extra Rough Glass Bead Texture with a touch of the underlying color or a warm color to off-set the cool reflectance.
 
[[Category: Extra Rough Sand Texture]]
[[Category: Extra Rough Sand Texture]]
[[category: type 1]]
[[category: type 1]]

Revision as of 12:48, 10 March 2015

  • May be tinted with Proceed Pigment Dispersions (transparent pigments are recommended), or Proceed Slow Drying Fluid Acrylics and Proceed Metallic Mediums. Do not add more than 10% Proceed Pigment Dispersion, universal colorant, Proceed Metallic Medium or Slow-Drying Fluids in combination by volume.
  • Use of more than recommended percentage could cause a change in application characteristics or, in the case of dispersions, water sensitivity and durability of the dried finish.

Always mix colorants thoroughly and test tint formulas for desired color before use.

  • Can be tinted with water based products. Sand Textures are also compatible with most universal colorants.
Personal tools