Tinting Extra Rough Glass Bead Texture

From PROCEED SYSTEM Wiki

(Difference between revisions)
Jump to: navigation, search
 
Line 1: Line 1:
-
[[File:Xrgb.JPG|right|300px]]
+
[[File:D160-D A (1264x1280).jpg|right|300px]]
*May be tinted with Proceed Pigment [http://proceedsystem.com/wiki/index.php/Category:Dispersions Dispersions] (transparent pigments are recommended), or Proceed [http://proceedsystem.com/wiki/index.php/Category:Slow_Drying_Fluid_Acrylics Slow Drying Fluid Acrylics] and Proceed [http://www.proceedsystem.com/wiki/index.php/Category:Metallic_Mediums Metallic Mediums].  Additions of more than 10% of Fluid Acrylics or Metallic Mediums will lower application viscosity.   
*May be tinted with Proceed Pigment [http://proceedsystem.com/wiki/index.php/Category:Dispersions Dispersions] (transparent pigments are recommended), or Proceed [http://proceedsystem.com/wiki/index.php/Category:Slow_Drying_Fluid_Acrylics Slow Drying Fluid Acrylics] and Proceed [http://www.proceedsystem.com/wiki/index.php/Category:Metallic_Mediums Metallic Mediums].  Additions of more than 10% of Fluid Acrylics or Metallic Mediums will lower application viscosity.   

Current revision as of 20:18, 12 March 2015

  • Can be tinted with water based products. Tinting with opaque colors, especially house paints, or at a high ratio will reduce some of the reflectance.


Color advice:

  • Apply straight out of the bucket over cooler tones. The Glass Beads themselves have the most "neutral" color Golden could find but due to the nature of light reflectance, the beads have a blue or cool cast.
  • When Extra Rough Glass Bead Texture is applied over red or warmer tones, the result is a frosty appearance on the off angle.
  • We advise to tint the Extra Rough Glass Bead Texture with a touch of the underlying color or a warm color to off-set the cool reflectance.
Personal tools