Sand Block Finish: Extra Rough Sand Texture

From PROCEED SYSTEM Wiki

(Difference between revisions)
Jump to: navigation, search
 
Line 9: Line 9:
4.  Pull tape from grout lines and glaze with glaze colors #1 (Sienna), #5 (Sepia) and #14 (Maple).  Use a squirt bottle with water to loosen up glazes if they are stiff and not moving.
4.  Pull tape from grout lines and glaze with glaze colors #1 (Sienna), #5 (Sepia) and #14 (Maple).  Use a squirt bottle with water to loosen up glazes if they are stiff and not moving.
-
5.  Lightly sand and then spritz with isopropyl alcohol and speckle with Raw Umber Slow Drying Fluid Acrylic for effect.
+
5.  Lightly sand and then spritz with isopropyl alcohol and speckle with [http://proceedsystem.com/wiki/index.php/Raw_Umber Raw Umber] Slow Drying Fluid Acrylic for effect.
[[Category: Extra Rough Sand Texture]]
[[Category: Extra Rough Sand Texture]]
[[Category: Finishes]]
[[Category: Finishes]]

Current revision as of 12:43, 10 March 2015

Right

1. Apply Extra Rough Sand Texture un-tinted for a smooth scratch coat. Dry overnight.

2. Apply tape to desired grout line pattern.

3. Trowel on Rough Sand Texture and Extra Rough Sand Texture , both un-tinted, at the same time. Let dry overnight.

4. Pull tape from grout lines and glaze with glaze colors #1 (Sienna), #5 (Sepia) and #14 (Maple). Use a squirt bottle with water to loosen up glazes if they are stiff and not moving.

5. Lightly sand and then spritz with isopropyl alcohol and speckle with Raw Umber Slow Drying Fluid Acrylic for effect.

Personal tools