Proceed Spraying Recommendations

From PROCEED SYSTEM Wiki

(Difference between revisions)
Jump to: navigation, search
(Created page with '{| border="1" ! scope="col" |'''PROCEED PRODUCT NAME''' ! scope="col" |RECOMMENDED SPRAY EQUIPMENT ! scope="col" |BRAND & MODELS TESTED ! scope="col" |PRESSURE SETTING ! scope="c…')
 
(5 intermediate revisions not shown)
Line 8: Line 8:
! scope="col" |ADDITIONAL NOTES
! scope="col" |ADDITIONAL NOTES
|-
|-
-
| Cracking Size || HVLP GUN || Titan TS 40P, Vapor 19000 || 40 psi for Vapor 19000 || 73/000 || 12" || Spray lightly until a uniformly wet appearance develops. Spattering should level during drying
+
| [http://proceedsystem.com/wiki/index.php/Category:Cracking_Size Cracking Size] || [["Hopper" or "Popcorn" Gun]] || Titan TS 40P, Vapor 19000 || 40 psi for Vapor 19000 || 73/000 || 12" || Spray lightly until a uniformly wet appearance develops. Spattering should level during drying
|-
|-
-
| Dispersions || NOT RECOMMENDED || N/A ||  || N/A ||  || Use as colorants into sprayed mixtures.  Not intended to be used as paints.
+
| [http://proceedsystem.com/wiki/index.php/Category:Dispersions Dispersions] || NOT RECOMMENDED || N/A ||  || N/A ||  || Use as colorants into sprayed mixtures.  Not intended to be used as paints.
|-
|-
-
|Extra Rough Glass Bead Texture || HOPPER GUN || Marshalltown Sharpshooter, GRACO RTX 900 or 1500 || 40 psi || #2 Hole, "White" || 18" || Difficult to spray without severe bounceback of beads.  Best to skim coat a layer of thick Proceed Texture and spray into wet layer.
+
|[http://proceedsystem.com/wiki/index.php/Category:Extra_Rough_Glass_Bead_Texture Extra Rough Glass Bead Texture] || [["Hopper" or "Popcorn" Gun]] || Marshalltown Sharpshooter, GRACO RTX 900 or 1500 || 40 psi || Marshalltown Sharpshooter for #2 Hole, "White" for GRACO RTX 900 or 1500 || 18" || Difficult to spray without severe bounceback of beads.  Best to skim coat a layer of thick Proceed Texture and spray into wet layer.
|-
|-
-
|Extra Rough Glass Bead Texture || HOPPER GUN || Marshalltown Sharpshooter, GRACO RTX 900 or 1500 || 40 psi || Marshalltown Sharpshooter for #2 Hole, "White" for GRACO RTX 900 or 1500 || 18" || Difficult to spray without severe bounceback of beads.  Best to skim coat a layer of thick Proceed Texture and spray into wet layer.
+
| [[Full-Bodied Painting & Glazing Medium]] || [[HVLP-High Volume, Low Pressure]] || Titan TS 40P, Vapor 19000 || 40 psi for Vapor 19000 || 15/000 || 8-12" || Apply in light layers, as thicker films are very slow drying.
|-
|-
-
| Full-Bodied Painting & Glazing Medium || HVLP GUN || Titan TS 40P, Vapor 19000 || 40 psi for Vapor 19000 || 15/000 || 8-12" || Apply in light layers, as thicker films are very slow drying.
+
| [[Low Absorbency Deep Tone Base Coat]] || [[Airless]] || Titan 44i, GRACO Mark V || Latex (high) for Titan 44i, 2400-2600 psi for GRACO Mark V || 517; 515 || 12" || Add dispersion to increase opacity, follow strict overlapping rule for the most even application.
|-
|-
-
| Low Absorbency Deep Tone Base Coat || AIRLESS || Titan 44i, GRACO Mark V || Latex (high) for Titan 44i, 2400-2600 psi for GRACO Mark V || 517; 515 || 12" || Add dispersion to increase opacity, follow strict overlapping rule for the most even application.
+
| [[Low Absorbency Pastel Base Coat]] || [[Airless]] || Titan 44i, GRACO Mark V || Latex (high) for Titan 44i, 2400-2600 psi for GRACO Mark V || 517; 515 || 12" || Add dispersion to increase opacity, follow strict overlapping rule for the most even application.
|-
|-
-
| Low Absorbency Pastel Base Coat || AIRLESS || Titan 44i, GRACO Mark V || Latex (high) for Titan 44i, 2400-2600 psi for GRACO Mark V || 517; 515 || 12" || Add dispersion to increase opacity, follow strict overlapping rule for the most even application.
+
| [[Low Viscosity Painting & Glazing Medium]] || [[HVLP-High Volume, Low Pressure]] || Titan TS 40P, Vapor 19000 || 40 psi for Vapor 19000 || 15/000 || 12" || Be careful to not apply heavily, as thick films are very likely to run or sheet down the wall.  Thicker films are also very slow drying.
|-
|-
-
| Low Viscosity Painting & Glazing Medium || HVLP GUN || Titan TS 40P, Vapor 19000 || 40 psi for Vapor 19000 || 15/000 || 12" || Be careful to not apply heavily, as thick films are very likely to run or sheet down the wall.  Thicker films are also very slow drying.
+
| [http://proceedsystem.com/wiki/index.php/Category:Matting_Additive Matting Additives] || NOT RECOMMENDED || N/A || || N/A || || Add to Proceed products to lower sheen, but do not use alone.
|-
|-
-
| Dispersions || NOT RECOMMENDED || N/A || || N/A || || Add to Proceed products to lower sheen, but do not use alone.
+
| [http://proceedsystem.com/wiki/index.php/Category:Metallic_Mediums Metallic Mediums] || [[HVLP-High Volume, Low Pressure]] || Titan TS 40P, Vapor 19000 || 40 psi for Vapor 19000 || 17/000 || 8-12" || Reduce with water or GOLDEN Airbrush Medium to a 2:1 (paint to thinner) and then adjust as needed for proper atomization.  Play with various tip sizes and gun settings for the best results.
|-
|-
-
| Metallic Mediums || HVLP GUN || Titan TS 40P, Vapor 19000 || 40 psi for Vapor 19000 || 17/000 || 8-12" || Reduce with water or GOLDEN Airbrush Medium to a 2:1 (paint to thinner) and then adjust as needed for proper atomizationPlay with various tip sizes and gun settings for the best results.
+
| [http://proceedsystem.com/wiki/index.php/Category:Metallic_Texture Metallic Texture] || [["Hopper" or "Popcorn" Gun]] || Marshalltown Sharpshooter, GRACO RTX 900 or 1500 || 40 psi || Marshalltown Sharpshooter for #1 Hole, "White" for GRACO RTX 900 or 1500 || 18" || Best used through hopper instead of tube feed.  Use of tube will require thinning with water or suitable mediumSpray into wet layer of thick product such as Transparent Glazing Gel. Severe Bounceback of beads during spraying.
|-
|-
-
| Metallic Texture || HOPPER GUN || Marshalltown Sharpshooter, GRACO RTX 900 or 1500 || 40 psi || Marshalltown Sharpshooter for #1 Hole, "White" for GRACO RTX 900 or 1500 || 18" || Best used through hopper instead of tube feed.  Use of tube will require thinning with water or suitable medium.  Spray into wet layer of thick product such as Transparent Glazing Gel. Severe Bounceback of beads during spraying.
+
| [http://proceedsystem.com/wiki/index.php/Category:Rough_Glass_Bead_Texture Rough Glass Bead Texture] || [["Hopper" or "Popcorn" Gun]] || Marshalltown Sharpshooter, GRACO RTX 900 or 1500 || 40 psi || Marshalltown Sharpshooter for #2 Hole, "White" for GRACO RTX 900 or 1500 || 18" || Best used through hopper instead of tube feed.  Use of tube will require thinning with water or suitable medium.  Spray into wet layer of thick product such as Transparent Glazing Gel. Severe Bounceback of beads during spraying.
|-
|-
-
| Rough Cracking Texture || HOPPER GUN || Marshalltown Sharpshooter, GRACO RTX 900 or 1500 || 40 psi || Marshalltown Sharpshooter for #1 Hole, "White" for GRACO RTX 900 or 1500 || 18" || Best used through hopper instead of tube feed.  Use of tube will require thinning with water or suitable medium. Apply evenly and use tools to smooth before drying.
+
| [http://proceedsystem.com/wiki/index.php/Category:Rough_Irregular_Texture Rough Irregular Texture] || [["Hopper" or "Popcorn" Gun]] || Marshalltown Sharpshooter, GRACO RTX 900 or 1500 || 40 psi || Marshalltown Sharpshooter for #2 Hole, "White" for GRACO RTX 900 or 1500 || 18" || Best used through hopper instead of tube feed.  Use of tube will require thinning with water or suitable medium.
|-
|-
-
| Rough Cracking Texture || HOPPER GUN || Marshalltown Sharpshooter, GRACO RTX 900 or 1500 || 40 psi || Marshalltown Sharpshooter for #2 Hole, "White" for GRACO RTX 900 or 1500 || 18" || Best used through hopper instead of tube feed.  Use of tube will require thinning with water or suitable medium.  Spray into wet layer of thick product such as Transparent Glazing Gel. Severe Bounceback of beads during spraying.
+
| [http://proceedsystem.com/wiki/index.php/Category:Color Slow Drying Fluid Acrylics] || [["Hopper" or "Popcorn" Gun]] || Titan TS 40P, Vapor 19000 || 40 psi for Vapor 19000 || 15/000; 17/000 || 12" || Spray lightly until a uniformly wet appearance develops. Spattering should level during drying.
|-
|-
-
| Rough Irregular Texture || HOPPER GUN || Marshalltown Sharpshooter, GRACO RTX 900 or 1500 || 40 psi || Marshalltown Sharpshooter for #2 Hole, "White" for GRACO RTX 900 or 1500 || 18" || Best used through hopper instead of tube feed.  Use of tube will require thinning with water or suitable medium.
+
| [http://proceedsystem.com/wiki/index.php/Category:Smooth_Absorbent_Texture Smooth Absorbent Texture] || [["Hopper" or "Popcorn" Gun]] || Marshalltown Sharpshooter, GRACO RTX 900 or 1500 || 40 psi || Marshalltown Sharpshooter for #1 Hole, "White" for GRACO RTX 900 or 1500 || 18" || Best used through hopper instead of tube feed.  Use of tube will require thinning with water or suitable medium.
|-
|-
-
| Slow Drying Fluid Acrylics || HVLP GUN || Titan TS 40P, Vapor 19000 || 40 psi for Vapor 19000 || 15/000; 17/000 || 12" || Spray lightly until a uniformly wet appearance developsSpattering should level during drying.
+
| [http://proceedsystem.com/wiki/index.php/Category:Smooth_Light_Bodied_Texture] || [["Hopper" or "Popcorn" Gun]] || Marshalltown Sharpshooter, GRACO RTX 900 or 1500 || 40 psi || Marshalltown Sharpshooter for #1 Hole, "White" for GRACO RTX 900 or 1500 || 18" || Best used through hopper instead of tube feedUse of tube will require thinning with water or suitable medium.
|-
|-
-
| Smooth Absorbent Texture || HOPPER GUN || Marshalltown Sharpshooter, GRACO RTX 900 or 1500 || 40 psi || Marshalltown Sharpshooter for #1 Hole, "White" for GRACO RTX 900 or 1500 || 18" || Best used through hopper instead of tube feed.  Use of tube will require thinning with water or suitable medium.
+
| [http://proceedsystem.com/wiki/index.php/Category:Smooth_Translucent_Texture Smooth Translucent Texture] || [["Hopper" or "Popcorn" Gun]] || Marshalltown Sharpshooter, GRACO RTX 900 or 1500 || 40 psi || Marshalltown Sharpshooter for #1 Hole, "White" for GRACO RTX 900 or 1500 || 18" || Best used through hopper instead of tube feed.  Use of tube will require thinning with water or suitable medium.
|-
|-
-
| Smooth Cracking Texture || HOPPER GUN || Marshalltown Sharpshooter, GRACO RTX 900 or 1500 || 40 psi || Marshalltown Sharpshooter for #1 Hole, "Beige" for GRACO RTX 900 or 1500 || 18" || Apply evenly and use tools to smooth before drying.
+
| [http://proceedsystem.com/wiki/index.php/Category:Smooth_Transparent_Glazing_Gel Smooth Transparent Glazing Gel] || [[Airless]] || Titan 44i, GRACO Mark V || Latex (high) for Titan 44i, 2400-2600 psi for GRACO Mark V || 517; 515 || 12" || Can be used through tube, esp larger RTX 1500 tube.
|-
|-
-
| Smooth Light-Bodied Texture || HOPPER GUN || Marshalltown Sharpshooter, GRACO RTX 900 or 1500 || 40 psi || Marshalltown Sharpshooter for #1 Hole, "White" for GRACO RTX 900 or 1500 || 18" || Best used through hopper instead of tube feed. Use of tube will require thinning with water or suitable medium.
+
| [http://www.proceedsystem.com/wiki/index.php/Category:Transparent_Cracking_Glaze Transparent Cracking Glaze] || [[Airless]] || Titan 44i, GRACO Mark V || Latex (high) for Titan 44i, 2400-2600 psi for GRACO Mark V || 517; 515 || 12" ||  
-
|-
+
-
| Smooth Translucent Texture || HOPPER GUN || Marshalltown Sharpshooter, GRACO RTX 900 or 1500 || 40 psi || Marshalltown Sharpshooter for #1 Hole, "White" for GRACO RTX 900 or 1500 || 18" || Best used through hopper instead of tube feed. Use of tube will require thinning with water or suitable medium.
+
-
|-
+
-
| Smooth Transparent Glazing Gel || AIRLESS || Titan 44i, GRACO Mark V || Latex (high) for Titan 44i, 2400-2600 psi for GRACO Mark V || 517; 515 || 12" || Can be used through tube, esp larger RTX 1500 tube.
+
-
|-
+
-
| Transparent Cracking Glaze || AIRLESS || Titan 44i, GRACO Mark V || Latex (high) for Titan 44i, 2400-2600 psi for GRACO Mark V || 517; 515 || 12" ||  
+
Apply evenly and use tools to smooth before drying.
Apply evenly and use tools to smooth before drying.
|}
|}
 +
 +
[[Category:Paints, Glazes & Mediums]]
 +
[[Category: Textures]]
 +
[[Category: Crackle]]
 +
[[Category: Spraying Notes]]

Current revision as of 12:30, 12 March 2015

PROCEED PRODUCT NAME RECOMMENDED SPRAY EQUIPMENT BRAND & MODELS TESTED PRESSURE SETTING NEEDLE/TIP SIZE DISTANCE TO SUBSTRATE ADDITIONAL NOTES
Cracking Size "Hopper" or "Popcorn" Gun Titan TS 40P, Vapor 19000 40 psi for Vapor 19000 73/000 12" Spray lightly until a uniformly wet appearance develops. Spattering should level during drying
Dispersions NOT RECOMMENDED N/A N/A Use as colorants into sprayed mixtures. Not intended to be used as paints.
Extra Rough Glass Bead Texture "Hopper" or "Popcorn" Gun Marshalltown Sharpshooter, GRACO RTX 900 or 1500 40 psi Marshalltown Sharpshooter for #2 Hole, "White" for GRACO RTX 900 or 1500 18" Difficult to spray without severe bounceback of beads. Best to skim coat a layer of thick Proceed Texture and spray into wet layer.
Full-Bodied Painting & Glazing Medium HVLP-High Volume, Low Pressure Titan TS 40P, Vapor 19000 40 psi for Vapor 19000 15/000 8-12" Apply in light layers, as thicker films are very slow drying.
Low Absorbency Deep Tone Base Coat Airless Titan 44i, GRACO Mark V Latex (high) for Titan 44i, 2400-2600 psi for GRACO Mark V 517; 515 12" Add dispersion to increase opacity, follow strict overlapping rule for the most even application.
Low Absorbency Pastel Base Coat Airless Titan 44i, GRACO Mark V Latex (high) for Titan 44i, 2400-2600 psi for GRACO Mark V 517; 515 12" Add dispersion to increase opacity, follow strict overlapping rule for the most even application.
Low Viscosity Painting & Glazing Medium HVLP-High Volume, Low Pressure Titan TS 40P, Vapor 19000 40 psi for Vapor 19000 15/000 12" Be careful to not apply heavily, as thick films are very likely to run or sheet down the wall. Thicker films are also very slow drying.
Matting Additives NOT RECOMMENDED N/A N/A Add to Proceed products to lower sheen, but do not use alone.
Metallic Mediums HVLP-High Volume, Low Pressure Titan TS 40P, Vapor 19000 40 psi for Vapor 19000 17/000 8-12" Reduce with water or GOLDEN Airbrush Medium to a 2:1 (paint to thinner) and then adjust as needed for proper atomization. Play with various tip sizes and gun settings for the best results.
Metallic Texture "Hopper" or "Popcorn" Gun Marshalltown Sharpshooter, GRACO RTX 900 or 1500 40 psi Marshalltown Sharpshooter for #1 Hole, "White" for GRACO RTX 900 or 1500 18" Best used through hopper instead of tube feed. Use of tube will require thinning with water or suitable medium. Spray into wet layer of thick product such as Transparent Glazing Gel. Severe Bounceback of beads during spraying.
Rough Glass Bead Texture "Hopper" or "Popcorn" Gun Marshalltown Sharpshooter, GRACO RTX 900 or 1500 40 psi Marshalltown Sharpshooter for #2 Hole, "White" for GRACO RTX 900 or 1500 18" Best used through hopper instead of tube feed. Use of tube will require thinning with water or suitable medium. Spray into wet layer of thick product such as Transparent Glazing Gel. Severe Bounceback of beads during spraying.
Rough Irregular Texture "Hopper" or "Popcorn" Gun Marshalltown Sharpshooter, GRACO RTX 900 or 1500 40 psi Marshalltown Sharpshooter for #2 Hole, "White" for GRACO RTX 900 or 1500 18" Best used through hopper instead of tube feed. Use of tube will require thinning with water or suitable medium.
Slow Drying Fluid Acrylics "Hopper" or "Popcorn" Gun Titan TS 40P, Vapor 19000 40 psi for Vapor 19000 15/000; 17/000 12" Spray lightly until a uniformly wet appearance develops. Spattering should level during drying.
Smooth Absorbent Texture "Hopper" or "Popcorn" Gun Marshalltown Sharpshooter, GRACO RTX 900 or 1500 40 psi Marshalltown Sharpshooter for #1 Hole, "White" for GRACO RTX 900 or 1500 18" Best used through hopper instead of tube feed. Use of tube will require thinning with water or suitable medium.
[1] "Hopper" or "Popcorn" Gun Marshalltown Sharpshooter, GRACO RTX 900 or 1500 40 psi Marshalltown Sharpshooter for #1 Hole, "White" for GRACO RTX 900 or 1500 18" Best used through hopper instead of tube feed. Use of tube will require thinning with water or suitable medium.
Smooth Translucent Texture "Hopper" or "Popcorn" Gun Marshalltown Sharpshooter, GRACO RTX 900 or 1500 40 psi Marshalltown Sharpshooter for #1 Hole, "White" for GRACO RTX 900 or 1500 18" Best used through hopper instead of tube feed. Use of tube will require thinning with water or suitable medium.
Smooth Transparent Glazing Gel Airless Titan 44i, GRACO Mark V Latex (high) for Titan 44i, 2400-2600 psi for GRACO Mark V 517; 515 12" Can be used through tube, esp larger RTX 1500 tube.
Transparent Cracking Glaze Airless Titan 44i, GRACO Mark V Latex (high) for Titan 44i, 2400-2600 psi for GRACO Mark V 517; 515 12"

Apply evenly and use tools to smooth before drying.

Personal tools