Revision as of 11:40, 10 March 2015 by Lori (Talk | contribs)
(diff) ← Older revision | Current revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Extra Rough Sand Texture Block

1. Apply Extra Rough Sand Texture un-tinted for a smooth scratch coat. Dry overnight. 2. Apply tape to desired grout line pattern. 3. Trowel on Rough Sand Texture and Extra Rough Sand Texture , both un-tinted, at the same time. Let dry overnight. 4. Pull tape from grout lines and glaze with glaze colors #1 (Sienna), #5 (Sepia) and #14 (Maple). Use a squirt bottle with water to loosen up glazes if they are stiff and not moving. 5. Lightly sand and then spritz with isopropyl alcohol and speckle with Raw Umber Slow Drying Fluid Acrylic for effect.

Personal tools