Help:Contents

From PROCEED SYSTEM Wiki

(Difference between revisions)
Jump to: navigation, search
(Created page with 'Extra Rough Sand Texture Block 1. Apply Extra Rough Sand Texture un-tinted for a smooth scratch coat. Dry overnight. 2. Apply tape to desired grout line pattern. 3. Trowel …')
(Blanked the page)
 
Line 1: Line 1:
-
Extra Rough Sand Texture Block
 
-
1.  Apply Extra Rough Sand Texture  un-tinted for a smooth scratch coat. Dry overnight.
 
-
2.  Apply tape to desired grout line pattern.
 
-
3.  Trowel on Rough Sand Texture and Extra Rough Sand Texture , both un-tinted, at the same time.  Let dry overnight.
 
-
4.  Pull tape from grout lines and glaze with glaze colors #1 (Sienna), #5 (Sepia) and #14 (Maple).  Use a squirt bottle with water to loosen up glazes if they are stiff and not moving.
 
-
5.  Lightly sand and then spritz with isopropyl alcohol and speckle with Raw Umber  Slow Drying Fluid Acrylic for effect.
 

Current revision as of 12:36, 12 March 2015

Personal tools