Category:Rough Regular Texture

From PROCEED SYSTEM Wiki

Revision as of 18:12, 26 June 2011 by Andre (Talk | contribs)
Jump to: navigation, search

Proceed® Rough Regular Texture is a translucent acrylic mastic texture coating that requires minimal surface preparation to correct minor surface blemishes and drywall seams. It is formulated with a regular, coarse aggregate to impart the look of cut stone surfaces and stucco finishes as well as sand wash looks.

Please click this link to view the application guide: http://www.proceedsystem.com/products/documents/roughregular.pdf

Contents

Characteristics

  • Can be tinted, troweled, thinned and rolled.

How do I apply Rough Regular Texture?

Apply to a clean and dry substrate by roller or trowel. Apply at rate of 70 - 80 sq. ft. /gal. to conceal surface irregularities of the substrate or to cover holes and minor cracks. Trowel or tool to desired appearance. Subsequent coats may be applied if desired. Let dry 12 - 24 hours before overcoating with other Proceed products. Full hardness is developed in 2 - 4 weeks. May be thinned with water to adjust application consistency. Clean tools with soap and water. Store between 50º - 80ºF.

How do I tint Rough Regular Texture?

Tint with Proceed Pigment Dispersions. Use high transparency pigments to maximize translucency of the final finish. High-hiding pigments will result in an opaque finish. Do not add more than 10% dispersion. Always test tint ratio before use. Use of more than recommended percentage could cause water sensitivity. For more information please review How to Tint the Proceed Products.

Why can't Rough Regular Texture be sanded?

The Rough Regular Texture contains quartz silica. As a powder, inhalation of silica is chronically carcinogenic. In the form of this product, Rough Regular Texture, the material is completely bound and there is no exposure.


Proper precautions.

Why we make it -

Used for brick Crispy and hard if sanded would be best to seal it

Flame Spread Rating

Golden Artist Colors, Inc. has not performed testing to assign a rate of flame spread for Golden water-based acrylic paints and mediums. However, given their formulation, our water-based products would be expected to perform similarly to typical latex house paints in regard to their ability to support combustion.

What to Avoid

  • Do not sand or spray.
  • Don't allow your product to freeze.

Applicator's Experiences & Project Gallery

Note to Proceed Team - this is to be uploaded by Lori/lab team: andre's story

Unique Uses

  • Can be applied direct to sheetrock without primer and with good adhesion.
  • Can be applied to Canvas on Walls.

Coverage

100 sq. ft./gallon

Coverage will vary depending on your application technique. See Coverage Calculation to determine how you can plan what you'll need on a job site.

Personal tools