Category:Glazes

From PROCEED SYSTEM Wiki

(Difference between revisions)
Jump to: navigation, search
(Speeding up the Drying of Long Open Time Products)
 
(27 intermediate revisions not shown)
Line 1: Line 1:
-
Proceed® Full-Bodied Painting & Glazing Medium and Low Viscosity Painting & Glazing Medium are designed for easy blending and exceptionally long working time.  
+
[[File:DSC00292.jpg|right|200px]]
 +
Proceed® [[Full-Bodied Painting & Glazing Medium]] and [[Low Viscosity Painting & Glazing Medium]] are designed for easy blending and exceptionally long working time. You can use them for traditional and contemporary glazing techniques. You can also use either glaze to thin out thicker products or increase workability, rollability and open time. Both Glazes have a thixotropic characteristic, meaning they thicken at rest.  This means you'll see separation in the container if the product has been sitting for an extended amount of time.  This is normal.  Simply shake and the two "phases" will mix back into themselves.
-
==Glaze Characteristics==
+
These glazes have a lot of open time, adjusting the sheen and absorbency of the paint beneath it will increase your control within different environmental conditions.  For example, working in humid South Carolina in July may cause you to basepaint with a Satin or Eggshell sheen instead of the Semi-Gloss that was used the previous winter to have the same open time.
-
*Use either glaze to thin out thicker products or increase workability, rollability and open time.
+
-
*Both Glazes have a thixotropic characteristic meaning they thicken at rest.  This means you'll see separation in the container if the product has been sitting for an extended amount of time.  This is normal.  Simply shake and the two "phases" will mix back into themselves.
 
-
*These glazes have a lot of open time, adjusting the sheen and absorbency of the paint beneath it will increase your control within different environmental conditions.  For example, working in humid South Carolina in July may cause you to basepaint with a Satin or Eggshell sheen instead of the Semi-Gloss that was used the previous winter to have the same open time.
+
*Please review the Painting & Glazing Mediums [http://www.proceedsystem.com/products/documents/PaintingGlazingMediumAppGuide.pdf Application Guide]
 +
*An instructive presentation on the differences between the two glazes and aspects of the Slow Drying Fluid Acrylics compared to other known types of paint, created by our European distributors, Obeeliks, can be viewed here: [http://www.proceedsystem.com/wiki/images/Proceed.ppt Proceed Comparison Powerpoint Slide Show]
 +
*[http://www.proceedsystem.com/video/totem.php/| Click here to watch a video on Pierre Finkelstein's Tote'em Bags]
-
*[[How to Tint the Proceed Products]]
 
-
*Mix with Slow-Drying Fluid Acrylics at any desired ratio or with Pigment Dispersions up to a 5:1 ratio of  Glaze to Dispersion. Do not mix with oil paint.  Glossy, non-absorbent surfaces should be abraded for increased adhesion. Full cure requires 24-48 hours.  Seal with a varnish/topcoat for maximum durability. Clean tools with soap and water.
 
-
*Please review the following link:
 
-
http://www.proceedsystem.com/products/documents/PaintingGlazingMediumAppGuide.pdf
 
-
*An instructive presentation on the differences between the two glazes and aspects of the Slow Drying Fluid Acrylics compared to other known types of paint, created by our European distributors, Obeeliks, can be viewed here: [[File:Proceed.ppt]]
 
-
=Coverage=
 
-
Coverage will vary depending on your application technique.
 
-
See [[Coverage Calculation]] to determine how you can plan what you'll need on a job site.
 
-
==What to Avoid==
+
[[File:Glazesandmedsjoelanuchacart.JPG|200px|thumb|right|An example of a work cart complete with tools and Proceed Glaze and colorants!]]
-
*"Sticky" or "tacky" glaze surfaces happen when the glaze has not sufficiently absorbed and dried onto the painted surface. Ways to avoid creating a "sticky" situation include being aware of the ambient drying conditions on the day of applying the glaze and over the following days.  If its going to be very humid, choose to work with a glaze with "less open time" or use a more absorbent/less sealed base paint beneath the glaze and/or use a dehumidifier in the space and/or use a fan after the glaze application has been applied.
+
-
*Don't allow your product to [[Freezing and Thawing Proceed Products|freeze.]] Minimum film formation temperature is 49°F/9°C.
+
-
==Applicator's Experiences & Project Gallery==
 
-
==Unique Uses==
 
-
*Staining and Sealing mixtures = 30% Full Bodied [[Glaze]], 30% [[Smooth Transparent Glazing Texture]], 40% [[Slow drying fluid acrylics]], watch this video: http://www.proceedsystem.com/video/stainFinishOneStep.php
 
-
Include Tim G's story and pics...
+
 
-
[[category:Glazes & Mediums]]
+
 
-
[[category:Beading or Wetting Out]]
+
 
 +
 
 +
[[Category:Paints, Glazes & Mediums]]
 +
[[Category:All Products]]
 +
 
 +
[[Category:Metallic Texture Tints]]
 +
[[Category: Metallic Mediums Tints]]
 +
[[Category: Low Absorbency Base Paint Tints]]
 +
[[Category: Glaze Tints]]
 +
[[Category: Dye-Like Transparent Color Tints]]

Current revision as of 17:39, 12 March 2015

Proceed® Full-Bodied Painting & Glazing Medium and Low Viscosity Painting & Glazing Medium are designed for easy blending and exceptionally long working time. You can use them for traditional and contemporary glazing techniques. You can also use either glaze to thin out thicker products or increase workability, rollability and open time. Both Glazes have a thixotropic characteristic, meaning they thicken at rest. This means you'll see separation in the container if the product has been sitting for an extended amount of time. This is normal. Simply shake and the two "phases" will mix back into themselves.

These glazes have a lot of open time, adjusting the sheen and absorbency of the paint beneath it will increase your control within different environmental conditions. For example, working in humid South Carolina in July may cause you to basepaint with a Satin or Eggshell sheen instead of the Semi-Gloss that was used the previous winter to have the same open time.





An example of a work cart complete with tools and Proceed Glaze and colorants!

Subcategories

This category has the following 2 subcategories, out of 2 total.

G

S

Personal tools