Adding Sand to Proceed Textures

From PROCEED SYSTEM Wiki

(Difference between revisions)
Jump to: navigation, search
Line 9: Line 9:
==Rough Metallic Stucco==
==Rough Metallic Stucco==
-
If you add silica sand to the Smooth Transparent Glazing Gel you can have a clear enough base that you can tint it with metallic mediums and make a "metallic stucco".
+
If you add silica sand to the Smooth Transparent Glazing Gel, the result is a clear base that you can tint with metallic mediums and make a "metallic stucco".
==Saving money==
==Saving money==

Revision as of 18:50, 31 January 2012

Sometimes you just need a bit more grit! The Proceed Textures are designed to provide the maximum amount of flexibility for the user. Leaving rough materials out of the textures at the factory allows you to obtain a full spectrum of options on your own. Adding sand to some of the textures allows you to match products that already exist in the marketplace or make new ones that have never been thought of.

Stucco

The word stucco is a term that is used in a variety of ways but most often it refers to a heavy, sand-based plaster. Emotionally, the main physical property people associate with the term is the silica sand found in most stuccos. Many decorative plasters imitate stucco and so can you with the Proceed materials and save money at the same time.

To make a stucco-like material you can add 70 mesh silica sand, acquired at any pottery supply store, to the Rough Regular Texture 1:1. This will make the texture harder and grittier to resemble a more industrial plaster.

This mixture is a translucent mixture that you can tint fairly dark, or with the addition of white Dispersion, it can resemble products like Faux Effects' "Plastertex" or Adicolor's "Stone FX".

Rough Metallic Stucco

If you add silica sand to the Smooth Transparent Glazing Gel, the result is a clear base that you can tint with metallic mediums and make a "metallic stucco".

Saving money

When adding silica sand to any of the textures you are saving money. A 25 lb bag of 70 mesh silica sand costs about $7 and equals about 3 gallons of material by volume. This means if you add 1:1 sand to texture you are decreasing your per bucket cost by almost half. In other words, mixing sand at this ratio makes a gallon of material cost around $25.

Personal tools