Proceed Spraying Recommendations

From PROCEED SYSTEM Wiki

Jump to: navigation, search
PROCEED PRODUCT NAME RECOMMENDED SPRAY EQUIPMENT BRAND & MODELS TESTED PRESSURE SETTING NEEDLE/TIP SIZE DISTANCE TO SUBSTRATE ADDITIONAL NOTES
Cracking Size "Hopper" or "Popcorn" Gun Titan TS 40P, Vapor 19000 40 psi for Vapor 19000 73/000 12" Spray lightly until a uniformly wet appearance develops. Spattering should level during drying
Dispersions NOT RECOMMENDED N/A N/A Use as colorants into sprayed mixtures. Not intended to be used as paints.
Extra Rough Glass Bead Texture "Hopper" or "Popcorn" Gun Marshalltown Sharpshooter, GRACO RTX 900 or 1500 40 psi Marshalltown Sharpshooter for #2 Hole, "White" for GRACO RTX 900 or 1500 18" Difficult to spray without severe bounceback of beads. Best to skim coat a layer of thick Proceed Texture and spray into wet layer.
Full-Bodied Painting & Glazing Medium HVLP-High Volume, Low Pressure Titan TS 40P, Vapor 19000 40 psi for Vapor 19000 15/000 8-12" Apply in light layers, as thicker films are very slow drying.
Low Absorbency Deep Tone Base Coat Airless Titan 44i, GRACO Mark V Latex (high) for Titan 44i, 2400-2600 psi for GRACO Mark V 517; 515 12" Add dispersion to increase opacity, follow strict overlapping rule for the most even application.
Low Absorbency Pastel Base Coat Airless Titan 44i, GRACO Mark V Latex (high) for Titan 44i, 2400-2600 psi for GRACO Mark V 517; 515 12" Add dispersion to increase opacity, follow strict overlapping rule for the most even application.
Low Viscosity Painting & Glazing Medium HVLP-High Volume, Low Pressure Titan TS 40P, Vapor 19000 40 psi for Vapor 19000 15/000 12" Be careful to not apply heavily, as thick films are very likely to run or sheet down the wall. Thicker films are also very slow drying.
Matting Additives NOT RECOMMENDED N/A N/A Add to Proceed products to lower sheen, but do not use alone.
Metallic Mediums HVLP-High Volume, Low Pressure Titan TS 40P, Vapor 19000 40 psi for Vapor 19000 17/000 8-12" Reduce with water or GOLDEN Airbrush Medium to a 2:1 (paint to thinner) and then adjust as needed for proper atomization. Play with various tip sizes and gun settings for the best results.
Metallic Texture "Hopper" or "Popcorn" Gun Marshalltown Sharpshooter, GRACO RTX 900 or 1500 40 psi Marshalltown Sharpshooter for #1 Hole, "White" for GRACO RTX 900 or 1500 18" Best used through hopper instead of tube feed. Use of tube will require thinning with water or suitable medium. Spray into wet layer of thick product such as Transparent Glazing Gel. Severe Bounceback of beads during spraying.
Rough Glass Bead Texture "Hopper" or "Popcorn" Gun Marshalltown Sharpshooter, GRACO RTX 900 or 1500 40 psi Marshalltown Sharpshooter for #2 Hole, "White" for GRACO RTX 900 or 1500 18" Best used through hopper instead of tube feed. Use of tube will require thinning with water or suitable medium. Spray into wet layer of thick product such as Transparent Glazing Gel. Severe Bounceback of beads during spraying.
Rough Irregular Texture "Hopper" or "Popcorn" Gun Marshalltown Sharpshooter, GRACO RTX 900 or 1500 40 psi Marshalltown Sharpshooter for #2 Hole, "White" for GRACO RTX 900 or 1500 18" Best used through hopper instead of tube feed. Use of tube will require thinning with water or suitable medium.
Slow Drying Fluid Acrylics "Hopper" or "Popcorn" Gun Titan TS 40P, Vapor 19000 40 psi for Vapor 19000 15/000; 17/000 12" Spray lightly until a uniformly wet appearance develops. Spattering should level during drying.
Smooth Absorbent Texture "Hopper" or "Popcorn" Gun Marshalltown Sharpshooter, GRACO RTX 900 or 1500 40 psi Marshalltown Sharpshooter for #1 Hole, "White" for GRACO RTX 900 or 1500 18" Best used through hopper instead of tube feed. Use of tube will require thinning with water or suitable medium.
[1] "Hopper" or "Popcorn" Gun Marshalltown Sharpshooter, GRACO RTX 900 or 1500 40 psi Marshalltown Sharpshooter for #1 Hole, "White" for GRACO RTX 900 or 1500 18" Best used through hopper instead of tube feed. Use of tube will require thinning with water or suitable medium.
Smooth Translucent Texture "Hopper" or "Popcorn" Gun Marshalltown Sharpshooter, GRACO RTX 900 or 1500 40 psi Marshalltown Sharpshooter for #1 Hole, "White" for GRACO RTX 900 or 1500 18" Best used through hopper instead of tube feed. Use of tube will require thinning with water or suitable medium.
Smooth Transparent Glazing Gel Airless Titan 44i, GRACO Mark V Latex (high) for Titan 44i, 2400-2600 psi for GRACO Mark V 517; 515 12" Can be used through tube, esp larger RTX 1500 tube.
Transparent Cracking Glaze Airless Titan 44i, GRACO Mark V Latex (high) for Titan 44i, 2400-2600 psi for GRACO Mark V 517; 515 12"

Apply evenly and use tools to smooth before drying.

Personal tools