Category:Rough Glass Bead Texture

From PROCEED SYSTEM Wiki

Jump to: navigation, search



Proceed® Rough Glass Bead Texture is a trowelable, acrylic texture medium that is used to create contemporary accents, highlights, and embellishments.

For the technical overview please view the Technical Data Sheet




Click here to read an article techniques used by Mark Tillman with Rough Glass Bead Texture.

This is a technique that uses Rough Glass Bead Texture. The instructions used to create this technique are found here.













Characteristics



  • Rough Glass Bead Texture (RGBT) is a textural, reflective topcoat made with real glass beads with some recycled content.
  • RGBT is meant to be a single layer, decorative topcoat and is designed to be fast drying.
  • Applying thick layers. multiple thin layers, or mixing in other solid aggregates may result in a frosted appearance unless tinted. Why? Water or air in the acrylic will remain trapped between multiple layers of glass and will not clear up.
  • Rough Glass Bead Texture is not removable.

It will be nearly impossible to sand the Rough Glass Bead Texture once it has been applied. Plan ahead and either apply the finish to wallpaper liner or advise the clients that it will be necessary to skim over the finish with joint compound and resurface the wall in the future.

  • Proceed textures are formulated to contain less than 50 g/l of VOC’s and, as such, meet the criteria for LEED Credit 4.2 (Low Emitting Materials – Paints and Coatings).

If the Rough Glass Bead Texture has been excessively thinned with water or glaze reducing the "gel texture's" ability to hold onto the beads, the Glass Beads may come off after drying with some force. This may or may not be desirable.


Please click the link for a general video on Rough Glass Bead Texture




Personal tools