Applying Soft Light-Bodied Texture

From PROCEED SYSTEM Wiki

Jump to: navigation, search
  • Apply to a clean, dry substrate by roller or trowel.
  • Apply at rate of 70 - 80 sq ft/gal (10 mils dry film thickness) to conceal surface irregularities of the substrate or to cover holes and minor cracks.
  • Trowel or tool to desired appearance.
  • Subsequent coats may be applied if desired. Let dry 12 - 24 hours before overcoating with other Proceed products.
  • Full hardness is developed in 2 - 4 weeks.
  • May be thinned with water to adjust application consistency.
  • Clean tools with soap and water.
  • Store between 50° - 80°F.


Personal tools